Technical information

CX400 Technical Manual (Rev 1.00)
SATO /ARGOX Technical Documentation
Confidential Information
22
8.2 Trouble Shooting
< I. Power Fail >
LED Indication Status Cause
Both Power & Error are Off No Power 1. No Power Supplied
2. The fuse in Adaptor was burned out
3. Printer might be out of order.
“Main board “ or “ Panel Board “ Bad
4. Adaptor might be Bad
Power Connected
or
AC Power on Outlet
?
Yes
Is
Power Switch
on?
Yes
Is
Fuse in Adaptor
Burned-out?
Connect Power
Switch ON
Replace the fuse.
No
No
Turn on Switch to Check if Problem being Fixed or not?
Open the Cover of
Power Adaptor
“Main Control Board”, “Panel Board”
or “Power Adaptor” is Out of Order
No
YES
Turn Off Printer