Specifications
Table Of Contents
- Consumables
- Conventions
- Warranty and Copyright
- Contents
- CX SERIES PROGRAMMING GUIDE
- INTRODUCTION
- THE SATO PROGRAMMING LANGUAGE
- SELECTING PROTOCOL CONTROL CODES
- USING BASIC
- Printing with the Parallel Port
- Printing with the RS232 Port
- ROTATED FIELDS
- COMMAND DEFAULT SETTINGS
- PRINTER CONFIGURATION
- COMMAND CODE PAGE REFERENCE
- Bar Codes
- Bar Codes, Expansion
- Bar Codes, Variable Ratio
- Base Reference Point
- Characters, Custom-Designed
- Character Expansion
- Character, Fixed Spacing
- Character Pitch
- Character, Proportional Spacing
- Clear Print Job(s) & Memory
- Continuous Forms Printing
- Copy Image Area
- Cutter Command
- Fonts U, S, M, OA, OB, XU, XS & XM
- Fonts WB, WL, XB & XL
- Form Feed
- Form Overlay, Recall
- Form Overlay, Store
- Graphics, Custom
- Graphics, PCX
- Journal Print
- Label Size & Start Position
- Lines and Boxes
- Line Feed
- Off-Line/Pause
- Postnet
- Print Darkness
- Print Length, Expanded
- Print Position
- Print Quantity
- Print Speed
- Repeat Label
- Replace Data (Partial Edit)
- Reverse Image
- Rotate, Fixed Base Reference Point
- Rotate, Moving Base Reference Point
- Sequential Numbering
- Start/Stop Label
- Expanded Memory Option Commands
- Expanded Memory Function Fonts, TrueType Recall
- Expanded Memory Function Fonts, TrueType Store
- Expanded Memory Function Graphics, Custom Recall
- Expanded Memory Function Graphics, Custom Store
- Expanded Memory Function Graphics, PCX Recall
- Expanded Memory Function Graphics, PCX Store
- Expanded Memory Function Initialise
- Expanded Memory Function Area Select
- Expanded Memory Function Status
- Two-Dimensional Symbols
- Two-Dimensional Bar Codes Maxicode
- Two-Dimensional Bar Codes PDF417
- CONFIGURATION COMMANDS
- Calibrate Sensor
- Auto Calibration
- Custom Protocol Command Codes Download
- Label Tear-Off
- Print Darkness Fine Adjustment
- Print Test Label
- Set Print Mode
- Set RS232 Parameters
- Set Sensor Type
- Back Feed Enable
82
SATO CX Series Printer
Expanded Memory Function
Expanded Memory FunctionExpanded Memory Function
Expanded Memory Function
Graphics, PCX Recall
Graphics, PCX RecallGraphics, PCX Recall
Graphics, PCX Recall
Command Structure
<ESC>PYaaa
aa = Storage area number (001thru 099)
Example: <ESC>PY001
Placement: This command must be placed within its own
data stream specifying the placement of the
graphic.
Default: None
Command Function
To recall for printing a graphic file previously stored in a PCX
format in the Memory Card.
Printer Input
Normal Rotation Rotate Base Reference Point
<ESC>A<ESC>CC1 <ESC>A<ESC>CC1<ESC>%1
<ESC>V0100<ESC>H0001<ESC>PY001
<ESC>V0330<ESC>H0110<ESC>PY001
<ESC>Q1<ESC>Z <ESC>Q1<ESC>Z
2nd Rotation, Base Reference Point 3rd Rotation, Base Reference Point
<ESC>A<ESC>CC1<ESC>%2 <ESC>A<ESC>CC1<ESC>%3
<ESC>V0330<ESC>H0550<ESC>PY001
<ESC>V0100<ESC>H0750<ESC>PY001
<ESC>Q1<ESC>Z <ESC>Q1<ESC>Z
Printer Output
Special Notes:
1. This command requires Expanded Memory option. See
your SATO representative for details.
2. See the <ESC>PI Store PCX Graphics command.