Specifications

Operation Manual 6. Cleaning and Maintenance
CL608e/612e 45
Cleaning the Roller and Label Guides
Step 1 Switch OFF the power to the printer.
Step 2 Open the label access door.
Step 3 Open the print head assembly by pushing the head
latch toward the rear of the printer. The print head
assembly is spring-loaded and will automatically
open as soon as the head latch is disengaged.
Step 4 Apply any SATO approved thermal printer cleaner to
a clean wipe.
Step 5 The label pressure roller is located underneath the
feed roller assembly. It should be cleaned of any
label residue or other foreign material.
Step6 The label unwind guides used in guiding the labels
through the printer must be cleaned of any label or
ribbon residue or other foreign material.
Step7 Repeat as necessary. The rollers and guides should
be cleaned whenever foreign matter such as dust or
adhesive is present.
Head Latch
Label Unwind
Guides
Label Pressure
Roller