Specifications

Operation Manual 4. Media Loading
CL608e/612e 33
Step 10 If the ribbon is already loaded, close the print head
assembly by pushing downward on the green tab
until it latches closed.
Step 11 If the ribbon is not loaded, see the following descrip-
tion for loading instructions.
Step 12 Adjust the print head pressure knob based on the
media you have loaded. For media up to 60mm wide,
use the ”1“ position (minimum print head pressure),
for media between 60 and 120mm wide, use the ”2“
position. For media wider than 120mm, use the “3“
position (maximum print head pressure).
Note: If you use media narrower than 120mm, using
the wrong setting will apply excessive pressure
to the print head and may void the print head
warranty.
Print Head
Green Tab
Assembly
Head Latch
Feed Roller Assembly
Label Unwind Guides
Label Roll
Support
Media Knob