Specifications

Operation Manual 4. Media Loading
CL608e/612e 31
4. Media Loading
4.1 Loading Labels or Tags
Step 1 Open the side access door by swinging it up. The
hinge system automatically dampens the movement
to prevent the door from inadvertently falling and
possibly causing injury to the operator.
Step 2 Open the print head assembly by turning the head
latch toward the rear of the printer. The print head
assembly is spring-loaded and will automatically
open as soon as the head latch is disengaged.
Step 3 Push the label unwind guide to the outside of the
printer to give the maximum label width.
Step 4 Release the label roll support by pulling outward at
the top, then swing it down and out of the way.
Step 5 If using roll labels (or tags), load the media roll onto
the label unwind bracket so that the printing side of
the labels faces upwards as it unwinds from the roll.
Push the roll all the way to the inside of the printer
and push the label unwind guide snugly against the
outside of the label roll.
Label Roll
Support
Label Unwind
Head Latch
Label Unwind
Guides
Bracket