Specifications

18 CL608e/612e
3. Configuration Operation Manual
Compatibility Mode Selection (DSW2-8)
Software command compatibility with earlier SATO model printers.
Mode Selection (DSW3-1 and DSW3-2)
Selects the operating mode of the printer.
Label Sensor Selection (DSW3-3)
Enables or disables the Label Sensor. If the Sensor is enabled, it
will detect the edge of the label and position it automatically. If it is
disabled, the positioning must be under software control using Line
Feed commands.
* Factory Default
DSW2-8 SETTING
*OFF
Status 4
ON
Compatibility
12 345678
ON
OFF
DSW2
DSW3-1 DSW3-2 SETTING
*OFF *OFF
Batch/Continuous
OFF ON
Tear Off
ON OFF Cutter
ON ON
Dispenser
1 2 3 4 5 6 7 8
ON
OFF
DSW3
DSW3-3 SETTING
*OFF Sensor Used
ON Sensor Not Used
1 2 3 4 5 6 7 8
ON
OFF
DSW3