User manual

SAP Device Driver for SATO Printers 48-62
User Manual
Figure 51 Name-Value pairs information
The following are the available system commands:
Function
Command Name
Command
Value
SBPL
Command
Remarks
Print Speed
PRINT_SPEED
1~11
ESC+CS
Print
Darkness
PRINT_DARKNESS
ab,
a: 1~ 5
b: A~F
ESC+#E
Label Size
LABEL_SIZE
Refer to the
command
specification
ESC+A1
The printer driver
will generate a
default ESC+A1
command, based
on the label size of
designed Smart
Forms, if this
System command
is not specified.
Start Print
Correction
START_POINT
Refer to the
command
specification
ESC+A3
The printer driver
will generate a
default ESC+A3
command, based
on the position of
the designed Smart
Forms, if this
System command
is not specified.
Enlargement
of Print Area
ENLARGEMENT_AREA
No value is
needed
ESC+AX
Standard
Print Area
STANDAR_AREA
No value is
needed
ESC+AR
Print End
Position
PRINT_END_POS
No value is
needed
ESC+EP
Multiple
Cutting
MULTIPLE_CUT
0~9999
ESC+~(Null)
This command is
valid only when the
printer is equipped
with cutter
No. of Labels
per Cut
Segment
CUT_SEGMENT
0~9999
ESC+~A
This command is
valid only when the
printer is equipped
with cutter
Cutting
Operation
CUT_OPERATION
No value is
needed
ESC+~B
This command is
valid only when the
printer is equipped
with cutter
Auto Linefeed
AUTO_LINEFEED
0~999
ESC+E