User manual

SAP Device Driver for SATO Printers 42-62
User Manual
Figure 39 Defining Text Component
Under the ‘Output Options’ tab, select the SmartStyles which previously defined. So that the text
printing item can be available to use.
Figure 40 Adding Text
Click on the ‘General Attributes’ tab and click on the ‘Editor’ button to insert the text. Note: This
procedure could be varied depending on the editor mode.
Figure 41 Entering the text with format
The message is embedded in format tags. In the above example, the message is included in
<H0> and </> format tags which specify the SATO CG Triumvirate Font (ESC+RD) . Format H0
is a text printing item defined in the SmartStyles.