User manual

SAP Device Driver for SATO Printers 34-62
User Manual
6.1.7.3 QR Barcode with UNDEF
6.1.7.3.1 Create a new Barcode Definition.
Note:
4. The name of the Barcode
must start with “YSTQR_”.
This is how the Sato
Device Driver identifies
this as the Barcode
Definition for QR Code.
5. The Barcode Type must
be UNDEF.
6. The rest of the parameters
(except Rotation) will not
be used by Sato Device
Driver for the QR barcode.
Those parameters has to
be defined inside the Print
Control as below.
6.1.7.3.2 Define the Print Control information in the device type
SB015 defines the prefix which carries the following Sato Print Commands:
Entered commad in
Hex: 1B324433302c4d2c30352c312c301b444e
ASCII: 2D30,M,05,1,0DN
Command Format: <2D30>,a,bb,c,d
SBPL Command: <ESC>2D30
Parameters:
a Error Correction = L: 7%, M: 15%, Q: 25%, H: 30%
b Cell Size= 01 to 32 dots
c Data Setting Mode = 0: Manual, 1: Auto
d Concentration Mode = 0: Normal, 1 Concentration Mode (using 1 required more parameters)