User manual

SAP Device Driver for SATO Printers 32-62
User Manual
Example 3)
Cell width: 09, Cell pitch 15
<Esc>ＢＸ０１2００915００００００００１
Output:
The data of the Barcode will be appended to the Prefix print control (in this case, SB013).
If there is any special code (such as FNC1 code), you can append it here (as hex value).
SB014 defines the suffix. If there is no data for the Suffix, you can leave the print control empty.
6.1.7.2.3 Mapping the Barcode Definition to Print Control
Go to SE73->Printer Bar codes. Create the mapping in the device type.
1B425830313230303630363030303030303030311B444
3
<Esc> B X 0 1 2 0 0 6 0 6 0 0 0 0 0 0 0 0
1<Esc>DC
Click this for “Hex” input
Cell Width: 06 Cell Pitch: 06