User manual

SAP Device Driver for SATO Printers 28-62
User Manual
6.1.7 Customized Barcode with UNDEF
Note that this task should only be performed by advanced users. Please contact Sato technical
team at [e-mail] should you have any queries.
If the printer-resident (such as GS1-128) is not supported in SAP, customized print control can
be added into the device type and “UNDEF” barcode type can be used to map to the print
control.
UNDEF is only in Old Barcode Technology. To start with UNDEF, go to SE73->System Bar
codes to define a Barcode using the Conventional System Barcode (choose ‘Old’)
6.1.7.1 GS1-128 Barcode with UNDEF
Figure 26 Customized Barcode Definition
i. Create Customized Barcode Definition
Go to SE73->System Bar Codes to create a GS1-128 Barcode definition (Figure 26
Customized Barcode Definition). Use “UNDEF” as the Bar code type. Note that the
“Bar code width” of the above definition will not be used.