Instruction manual
Table Of Contents
- Safety Precautions
- Precautions for Installation and Handling
- Select a Safe Location
- Power Supply
- Checking Accessories
- About the Box
- Power Setting
- 1. Connect the AC power cord to the AC adapter.
- 2. Connect the printer to the AC adapter. Connect the AC adapter to the AC power outlet. When connecting the DC power cord to the printer’s power connector, make sure the DC power cord connector is oriented properly. When connecting the DC power co...
- 3. Press the POWER button on the operation panel of the printer. The ON LINE (POWER) lamp is on. Check that the ON LINE (POWER) lamp is on.
- 4. Press the POWER button to turn off the printer. When the power is off, the ON LINE (POWER) lamp turns off.
- Basic Specifications
- Asia Pacific & Oceania Region
- European Region
- American Region
- SATO Group of Companies
Section 3: Basic Specifications
CG4 Series Quick Guide Page 3-5
Magnification
ratio
(Characters and
barcode)
Characters: Vertical 1 to 12 times, horizontal 1 to 12 times
Barcode: 1 to 12 times
Standard func-
tions
1. Status return function
2. Graphic function
3. Sequential number function
4. Form overlay function
5. Custom character registration function
6. Black/white inversion function
7. Ruled line function
8. Format registration function
9. Zero slash switching function
Self-diagnostic
function
1. Paper end detection
2. Cover open detection
3. Test print
4. Ribbon end detection (for thermal transfer type only)
5. Cutter error (when the cutter unit is installed)
Noise (EMC)
standard
FCC15B Class B
Safety standards UL60950-1(2001), CSA22.2 No. 60950-1-03
Notice regarding the registered trademarks and trademarks of other companies:
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
Model name CG408 DT CG412 TT CG408 TT CG412 TT