Instruction manual
Table Of Contents
- Safety Precautions
- Precautions for Installation and Handling
- Select a Safe Location
- Power Supply
- Checking Accessories
- About the Box
- Power Setting
- 1. Connect the AC power cord to the AC adapter.
- 2. Connect the printer to the AC adapter. Connect the AC adapter to the AC power outlet. When connecting the DC power cord to the printer’s power connector, make sure the DC power cord connector is oriented properly. When connecting the DC power co...
- 3. Press the POWER button on the operation panel of the printer. The ON LINE (POWER) lamp is on. Check that the ON LINE (POWER) lamp is on.
- 4. Press the POWER button to turn off the printer. When the power is off, the ON LINE (POWER) lamp turns off.
- Basic Specifications
- Asia Pacific & Oceania Region
- European Region
- American Region
- SATO Group of Companies
SATO America, Inc.
10350A Nations Ford Road
Charlotte, NC 28273
Main Phone: (704) 644.1650
Technical Support: (704) 644.1660
Technical Support Fax: (704) 644.1661
E-Mail: satosales@satoamerica.com
techsupport@satoamerica.com
www.satoamerica.com
© Copyright 2010 SATO America, Inc.
All rights reserved.
Reproduction in any manner of all or part of this document is prohibited.
The content of this document may be changed without prior notice.
Great care has been taken in the preparation of this document. If any problems, mistakes, or omissions are found,
please contact your SATO reseller or technical support center.
FCC Statement
The printer complies with the requirements in Part 15 of FCC Rules for a Class B Computing Device. Operating
the printer in a residential area may cause unacceptable interference to radio and TV reception. If the interference
is unacceptable, you can reposition the equipment, which may improve reception.