Instruction manual
Table Of Contents
- Safety Precautions
- Precautions for Installation and Handling
- Select a Safe Location
- Power Supply
- Checking Accessories
- About the Box
- Power Setting
- 1. Connect the AC power cord to the AC adapter.
- 2. Connect the printer to the AC adapter. Connect the AC adapter to the AC power outlet. When connecting the DC power cord to the printer’s power connector, make sure the DC power cord connector is oriented properly. When connecting the DC power co...
- 3. Press the POWER button on the operation panel of the printer. The ON LINE (POWER) lamp is on. Check that the ON LINE (POWER) lamp is on.
- 4. Press the POWER button to turn off the printer. When the power is off, the ON LINE (POWER) lamp turns off.
- Basic Specifications
- Asia Pacific & Oceania Region
- European Region
- American Region
- SATO Group of Companies
Section 2: Turning On the Power
CG4 Series Quick Guide Page 2-3
4. Press the POWER button to turn off the printer. When the power is off, the ON LINE (POWER) lamp turns
off.
CAUTION
• The power cord set supplied with this printer is only for use with this printer. Do not use it for other electrical
products.
• Do not operate the POWER button or plug in/unplug the power cord with wet hands. Doing so could result
in electric shock.