Instruction manual
Table Of Contents
- Safety Precautions
- Precautions for Installation and Handling
- Select a Safe Location
- Power Supply
- Checking Accessories
- About the Box
- Power Setting
- 1. Connect the AC power cord to the AC adapter.
- 2. Connect the printer to the AC adapter. Connect the AC adapter to the AC power outlet. When connecting the DC power cord to the printer’s power connector, make sure the DC power cord connector is oriented properly. When connecting the DC power co...
- 3. Press the POWER button on the operation panel of the printer. The ON LINE (POWER) lamp is on. Check that the ON LINE (POWER) lamp is on.
- 4. Press the POWER button to turn off the printer. When the power is off, the ON LINE (POWER) lamp turns off.
- Basic Specifications
- Asia Pacific & Oceania Region
- European Region
- American Region
- SATO Group of Companies
Section 1: Names of Parts
CG4 Series Quick Guide Page 1-3
Back view
9
10
Type1:
USB and RS232C on-board
Type2:
USB and LAN on-board
11
12
13
15
14
11
12
13
15
16
9
USB and RS232C interface on-board
10
USB and LAN interface on-board
USB and IEEE interface on-board
11
10
10
11
11
12
13
14
Media inlet
An opening for Fan-folded media or media
from unwinder to feed in to the printer.
DC input power terminal
Supplies power to the printer by inserting the
power cable via the AC adapter.
USB interface terminal
To connect printer to the host computer using
the USB interface.
RS-232C interface terminal
To connect printer to the host computer using
RS-232C interface.
Or, to connect the optional Keypad, Scanner or
Smart keyboard to the printer.
LAN interface terminal
To connect printer to the host computer using
LAN interface.
IEEE interface terminal
To connect printer to the host computer using
IEEE interface.
9
9
10
10
11
11
12
12
13
13
14
14