Instruction manual

Section 6: General Specifications
Page 6-2 CG4 Series Operator Manual
MODEL NAME
CG408 DT/ CG408TT CG412 DT/ CG412TT
MEDIA (BE SURE TO USE MEDIA MANUFACTURED OR CERTIFIED BY SATO)
Type
Direct Thermal / Thermal Transfer depending on print model (DT or TT)
Roll stock or Fan-fold
Wind Direction Roll stock: Face In or Face out winding
Roll and Core Diameter
Maximum outer diameter: 5.04” (128 mm) with Inner core diameter: 1.5” (40 mm)
* Inner core diameter: 0.75” (19.05 mm) with maximum outer diameter: 4.33” (110
mm) can be accepted, but there is no performance guarantee.
Fanfold Max. stack height 4.65” (118 mm) (external supply)
Size
Label
Continuous
Cutter
Dispenser
Tear-off
Linerless
Pitch : 0.27” to 11.8” (7 to 300 mm)
Pitch including liner : 0.39” to 11.93” (10 to 303 mm)
Width : 0.86” to 4.21” (22 to 107 mm)
Width including liner : 0.98” to 4.33” (25 to 110 mm)
Pitch : 0.87” to 11.8” (22 to 300 mm)
Pitch including liner : 0.98” to 11.93” (25 to 303 mm)
Width : 0.87” to 4.21” (22 to 107 mm)
Width including liner : 0.98” to 4.33” (25 to 110 mm)
Pitch : 0.87” to 3.93” (22 to 100 mm)
Pitch including liner : 0.98” to 4.05” (25 to 103 mm)
Width : 0.87” to 4.21” (22 to 107 mm)
Width including liner : 0.98” to 4.33” (25 to 110 mm)
Pitch : 0.87” to 11.8” (22 to 300 mm) *
1
Pitch including liner : 0.98” to 11.93” (25 to 303 mm)
Width : 0.87” to 4.21” (22 to 107 mm)
Width including liner : 0.98” to 4.33” (25 to 110 mm)
Pitch : 0.98” to 3.93” (25 to 100 mm) *
1
With : 0.98” to 4.33” (25 to 110 mm)
Non-adhesive paper
Continuous
Cutter
Tear-off
Pitch : 0.39” to 11.93” (10 to 303 mm) *
1
Width : 0.98” to 4.33” (25 to 110 mm)
Pitch : 0.98” to 11.93” (25 to 303 mm)
Width : 0.98” to 4.33” (25 to 110 mm)
Pitch : 0.98” to 11.93” (25 to 303 mm) *
1
Width : 0.98” to 4.33” (25 to 110 mm)
*
1
When using media with small pitch, you must tear it by hand.
• The above size may be limited by use conditions, such as type of paper, usage
environment, and application.
• When using the dispenser mode, restrictions apply to the maximum paper length
according to paper installation conditions.
Thickness 0.0024” to 0.0074” (0.06 to 0.19 mm)