User's Manual

21-Sep-10 49-70-020-DOC 25
User Manual
MSTRP Tunnel Readers
4.5 CommuniCAtion test
Perform the tag reading test by selecting Tools -> System -> Grid of tags sight count.
Check some default settings in Tools -> System-> Reader Settings:
Tag Type. Default is IFX_STACK. If you use ItemTags the default should be changed to IFX_ITEM. If you want to read
both IT and ST tags the Tag Type should be IFX_STACK.
The Powering Field box should be ticked.
Use one of the fully powered tags, place the tag on the reader antenna.
The rst square in the grid should turn from white to blue and display the tag’s ID number and the number of times the
tag was sighted (should be one). An example of this is shown below.
•
•