User's Manual

12 49-70-020-DOC 21-Sep-10
User Manual
MSTRP Tunnel Readers
4. INSTALLATION
4.1 quiCk stARt guide
Quick Start Guide
MSTRP-5050 (MLC5/6)
1. Hardware Installation
(4.2 User Manual)
Connect a power cable
to the reader
Connect a communication cable
(USB or Ethernet) to the reader
and host PC or network hub/switch
2. Software Installation
(4.3 User Manual)
Install the ReaderManager software
from the supplied CD-ROM
3. Connecting to a reader using the ReaderManager
(4.4 User Manual)
Open
Start -> Settings -> Control Panel
-> Network Connections
in Windows
(if using an Ethernet crossover cable)
Turn on the reader.
Wait for automatic network
connection to be established.
Open the Connection menu in the
ReaderManager. Find and click on
the reader you want to connect to
4. Tag Reading
(4.5 User Manual)
Open
Tools -> System -> Grid of Tag Sight Counts
in the ReaderManager.
Place tag/s onto the antenna/s
The tag IDs and the number of times the
tags were sighted will be displayed
HF RFID Readers/Writers
PJM
®
Technology
ISO/IEC 18000-3 Mode 2
Quick Start Guide
MSTRP-5050 (MLC5/6)
1. Hardware Installation
(4.2 User Manual)
Connect a power cable
to the reader
Connect a communication cable
(USB or Ethernet) to the reader
and host PC or network hub/switch
2. Software Installation
(4.3 User Manual)
Install the ReaderManager software
from the supplied CD-ROM
3. Connecting to a reader using the ReaderManager
(4.4 User Manual)
Open
Start -> Settings -> Control Panel
-> Network Connections
in Windows
(if using an Ethernet crossover cable)
Turn on the reader.
Wait for automatic network
connection to be established.
Open the Connection menu in the
ReaderManager. Find and click on
the reader you want to connect to
4. Tag Reading
(4.5 User Manual)
Open
Tools -> System -> Grid of Tag Sight Counts
in the ReaderManager.
Place tag/s onto the antenna/s
The tag IDs and the number of times the
tags were sighted will be displayed
HF RFID Readers/Writers
PJM
®
Technology
ISO/IEC 18000-3 Mode 2