User's Manual

13-Nov-07 49-70-020-DOC 2749-70-020-DOC 27 27
MSTRP-5050 (MC 5/6)
User Manual
To change a reader network name:
From the Tools menu, select System then Conguration System. The window shown below will be displayed.
Click the column on the right of Customer ID and enter the name you would like the Reader to be identied as.
This is the name that will appear on the Connection menu.
Click the Save button on the right to save your changes to the reader, or click the Refresh button to restore the
previously saved name.
Step 2: Click the Connection menu item to view readers found on the local network.
The ReaderManager will use network broadcasts to look for active readers via USB and Ethernet. If you click on
the Connection menu, you can see readers dened in there automatically.
A list of readers will be displayed. The IP address and MAC address will be shown on the status bar as you move
the mouse over each reader entry.
Step 3: To connect to a reader, select the reader you would like to connect to from the Connection menu,
then click the left mouse button.
The status bar will change from a red to a green background to indicate that the ReaderManager was able to
connect to a reader. The tag type and IP address are also shown on the status bar.
To get more information how to setup static connections to readers please refer to the ReaderManager Guide
(40-01-006-DOC).