User's Manual

22 49-70-020-DOC 13-Nov-0749-70-020-DOC 13-Nov-07 13-Nov-07
User Manual
MSTRP-5050 (MC 5/6)
These are the networking rules:
USB will always choose a subnet different to Ethernet.
Both interfaces will try to obtain the 169.254.0.0 range, but Ethernet has priority.
172.16.0.0/16 is USB’s fallover subnet if Ethernet has already taken it by either: DHCP, xed, or link-local
IP acquisition.
To change the reader’s network settings:
From the Tools menu in the ReaderManager select System then Conguration System. Click the Network
Conguration tab.
If the reader is to be assigned an IP address from a DHCP server click the Obtain an IP address automatically
check box.
To assign a static IP address, uncheck the check box and enter the IP address in the IP address text box. The
box will turn red if the IP address is not valid.
Care should be taken not to duplicate IP addresses on your network. If you are unsure what IP address to
use consult your system administrator.
Enter the network Subnet mask and Default gateway addresses in the text boxes provided.
Click the Save button to save these changes to the reader, or click the Refresh button to restore the last saved
values.
Restart the reader for these changes to take effect.
•
•
•