User's Manual

MDR-1109 with red and green LEDs
 the red LED will come on again in 1-3 seconds indicating that the unit
is in an operational mode; the green LED will be off
 once the unit is in an operational mode the red LED will remain lit
 Both LEDs are controlled by the MDR-1109
software
 This setting can be changed to LEDs being
controlled by ReaderManager software
depending on the user application. Refer to
Programmer Guide (40-01-000-DOC).
Step 3. Test the Reader with the supplied test tags. The green LED will flash every
time a tag is successfully read.
3.3.1 Connecting a Reader to a Computer using USB
Connect the MDR-1109 Reader to a host computer using the USB data
communication cable by plugging the USB cable into the MDR-1109 USB
device port and the host computer USB port.
!
When the USB connection is used only a screened USB cable
should be used.
MDR-1109 USER MANUAL 60-70-002-DOC ver.1 14