User's Manual

3. Getting Started Guide
3.1 Unpacking and Inspection
When you receive your system, inspect it for any
obvious damage that may have occurred during
shipment. If there is damage, notify the shipping
carrier and the supplier of the equipment or
Magellan if purchased directly from Magellan.
Until you have checked the system, save the
shipping carton and packaging materials in the
event the unit has to be returned.
Included with the MDR-1109 should be the following components:
 Reader-writer
 Power adaptor
The Reader connection to the power source is realized via a low voltage
power pack (12VDC output).
!
A power cable is not included. End-users should purchase a
power cable suitable for the country of use.
! CAUTION
Only power cables and adaptors that are
compliant with the regulations in the country of
use may be connected to Magellan’s equipment.
 Data communication cable
Magellan supplies one USB shielded cable (USB 2.0, 2 m long)
!
USB cable should not be longer than 3m
!
As shielded cables are generally required in order to comply
with EMC emissions limits, the shielded cables recommended
by Magellan Technology must be used. Unshielded cabled
may be used where explicitly allowed in the Installation
Requirements section of this User Manual.
Ethernet cable is not included with the supply.
Magellan recommends CAT5 Ethernet cable.
 Quick Start Guide
MDR-1109 USER MANUAL 60-70-002-DOC ver.1 8