User's Manual

40 63-70-076-DOC-1 September 2013
User ManualMARS-24ATR
7.3 specificAtions
ELECTRICAL
Operating Frequency
ISO/IEC Compliance
Command Data Rate
Reply Data Rate per Channel
Number of PJM Reply Channels
Number of External Antennas
Number of Axes
Operating Range
Compatible Antennas
Antenna Cable Length
Dedicated I/O
I/O Connector
Power Supply
DC Power Supply Connector
Mains Input
Mains Connector
Power Consumption
PERFORMANCE
Tag Type
Identification rate at 100% accuracy
Identify & read 96 bits data at 100%
accuracy
Identify, write & read back 96 bits data
at 100% accuracy
HOST
Host Interface
Minimum Host Computer Requirement”
SOFTWARE
Minimum Firmware Reader Server
ENVIRONMENTAL
Operation environment
Temperature range
Humidity
MECHANICAL
External Dimensions (L x W x H)
Internal Aperture
Net Weight
Net Volume
Shipping Dimensions (L x W x H)
Shipping Weight
Shipping Volume
GENERAL
Read and write operations
No manual calibration needed
Automatic tuning
Readers can be placed in close
proximity to one another
13.56 MHz
18000-3 Mode 2
424 kbit/s
106 kbit/s
8
up to 24
Antennas available for 1, 2 or 3 dimensional operation
Tag type dependent
Details available on request
1.5 m, 3 m (optional cable extender required), 8 m
1 supply +5V @ 200 mA max, 8 push-pull outputs + 3.3V
logic, 8 inputs +5V logic with 1KΩ pull-up: see Digital I/O
Application Note 063-70-050-DOC for further information
20 way IDC Header with latches
12VDC
2.5 mm DC centre pin positive
110 - 240 VAC @ 50/60 Hz
IEC 320/C14
36 W
Antenna dependent refer Tag Reference Table
up to 600 tags/s
up to 250 tags/s
up to 50 tags/s
USB and Ethernet (Ethernet Cable must be CAT 5 and
shielded)
“Windows XP SP2, 500 MHz CPU, 128MB RAM”
Version 3.42.8
Indoor use
0°C to +45°C
10% to 80%
(non-condensing)
383 x 186 x 80 mm
N/A
3.7 kg including power supply
0.0057 m³
490 x 250 x 170 mm
4.2 kg
0.021 m³
Yes
Yes (some antennas)
Yes
Yes, however antennas need minimum separation depending
on type