User's Manual

36 63-70-076-DOC-1 September 2013
User ManualMARS-24ATR
6.2 hoW to check A tAg configurAtion mode
The tag conguration mode can be checked with the ReaderManager:
1. Go to
Tools -> System -> Interrogate Command.
2. In
Reply select Normal and click Send.
3. Then go to
Tools -> System -> Table of Tag Messages to see the tag conguration in the Cong column. The
messages of all the tags currently in the reader antenna eld can be seen. 2000 means that the tag has been
recongured to ST ¼ normal power mode conguration. 6000 means that a tag is in ST normal power mode.
6.3 hoW to check A tAg chip type (it or st)
The tag chip type can be checked with the ReaderManager:
1. Go to
Tools > System > Tag Memory Map
2. Place a tag on the antenna. The tag ID# will appear below “Current tags”
3. Left mouse click on the ID#
4. The chip type can be seen in the “Value” column of the System Memory in line “0”:
Value for ItemTag chip is XXX0
Value for StackTag chip is XXX1
Note X means “do not care”