User's Manual

Click the Save button on the right to save your changes to the reader, or
click the Refresh button to restore the previously saved name.
Step 2. Click the Connection menu item to view Readers found on the local
network.
The ReaderManager will use network broadcasts to look for active readers
via USB and Ethernet. If you click on the Connection menu, you can see
readers defined in there automatically.
A list of Readers will be displayed. The IP address and MAC address will be
shown on the status bar as you move the mouse over each Reader entry.
Step 3. To connect to a Reader, select the Reader you would like to connect to from
the Connection menu, then click the left mouse button.
The status bar will change from a red to a green background to indicate that
the ReaderManager was able to connect to a Reader. The tag type and IP
address are also shown on the status bar.
To get more information how to setup static connections to Readers refer to
the ReaderManager Guide (40-01-006-DOC).
MARS-24 USER MANUAL 63-70-006-DOC ver.1
36