User's Manual

4.3.3Getting a Reader connected using the ReaderManager
Step 1. Open the Reader Manager.
ReaderManager will automatically detect all Readers on the local network.
When a Reader is connected for the first time to a network using an
Ethernet cable or a host computer using a USB cable, the Reader is
identified by its Model Name-Serial Number (recommended to keep).
Users can replace or add additional information to
the Model Name-Serial Number such as a physical
location or customer ID number.
Subsequently when a user starts using the Reader
the new name will appear on the list of Readers in
the Connection menu.
Tip: If you want to use the new name immediately,
simply unplug the power connector and plug in again
to view the new name on the Connection menu list.
To change a Reader network name:
From the Tools menu, select System then Configuration System. The
window shown below will be displayed.
Click the column on the right of Customer ID and enter the name you would
like the Reader to be identified as. This is the name that will appear on the
Connection menu.
MARS-24 USER MANUAL 63-70-006-DOC ver.1
35