User's Manual

4.1.4Connecting Multiple Readers to a local network

Multiple Readers can be connected to a local network using an Ethernet

hub/switch. Plug the Ethernet communication cable into the MARS’s RJ45

socket (Ethernet port) and Ethernet Hub.

Always connect Ethernet cable before power is applied to the

Reader.

MARS-24 with the Ethernet communication cable and power cable

4.1.5Connecting External Antennas

Connect each external antenna to a Reader’s Antenna Axis/port via a

supplied connection cable.

MARS-24 with the external 124 mm diam. antenna connected

MARS-24 USER MANUAL 63-70-006-DOC ver.1