User's Manual

4.1.2Connecting a Reader to a Computer using USB
Connect the MARS-24 Reader to a host computer using the USB data
communication cable by plugging the USB cable into the MARS-24 USB
device port and the host computer USB port.
Only one Magellan Reader can be connected to
the PC via USB at a time (limited by Windows).
!
When the USB connection is used only a screened USB cable
should be used.
MARS-24 with the USB communication cable and power cable
4.1.3Connecting a Reader to a Computer using Ethernet
Connect the MARS-24 Reader to a host computer using a cross over
Ethernet cable. Plug the Ethernet cross over cable into the MARS RJ45
socket (Ethernet port) and the network interface port on the PC.
!
Always connect Ethernet cable before power is applied to the
Reader.
MARS-24 USER MANUAL 63-70-006-DOC ver.1
24