User's Manual

4.Installation
Connect external antenna/s to the
Reader
Install the ReaderManager software
from the supplied CD-ROM
Connect a power pack to the Reader
Open the ReaderManager
Turn on the Reader
Open the Connection menu in the ReaderManager.
Find and click on the Reader you want to connect to.
QUICK START GUIDE
MARS Readers
Open Tools->System->Reader Setup
Use the Reader Setup Wizard to setup Reader-
antenna connection, tune and test antenna/s.
(Refer to the ReaderManager Guide)
HF RFID Readers-Writers
PJM
®
Technology
ISO/IEC 18000-3 Mode 2
Open Tools->System->Grid of Tag Sight Counts.
Place tag/s onto the antenna/s.
Connect a communication cable
(USB or Ethernet) to the Reader
and host PC
Hardware Installation
(4.1 User Manual)
Software
Installation
(4.2 User Manual)
Antenna Matching, Tuning
and Testing
(4.1.6 User Manual)
Tag Reading
(4.4 User Manual)
Connecting to a Reader
using the ReaderManager
(4.3 User Manual)
The tag's ID and the number of times the tags were
sighted will be displayed
MARS-1-2-4-6 USER MANUAL 64-70-017-DOC ver.1
21