User's Manual

How to check a tag configuration mode
1. In the ReaderManager go to Tools -> System -> Interrogate
Command.
2. In Reply select Normal and click Send.
3. Then go to Tools -> System -> Table of Tag Messages to see the
tag configuration in the Config column. The messages of all the tags
currently in the reader antenna field can be seen. 2000 means that
the tag has been reconfigured to ST ¼ normal power mode
configuration. 6000 means that a tag is in ST normal power mode.
MARS-1-2-4-6 USER MANUAL 64-70-017-DOC ver.1
19