User Guide

Reader Manager Guide Page 52 of 62 40-10-006-DOC 15/09/2006

Figure 36

Index

Description

This frame shows all x86 and ARM based readers detected on the network. If ReaderManager is connected to

a reader, this reader will be shown as the first item in the list and will be highlighted in red. ReaderManager

does not need to be connected to a reader to use this dialog, multiple readers can be upgraded at the same

time.

Tick this to reset the reader after the upgrade package is copied to the reader. If this is ticked when the

package is transferred to the reader, ReaderManager will be disconnected from the reader.

Select the package to transfer to the reader. Select Reader server to upgrade the reader server application,

select OS to upgrade the operation system.

This text box shows the available upgrades to apply to the reader. If the package shows None as the version

number there is no package available. Check the package filenames in the Upgrade directory.

5 Click this to start the upgrade

6 Once the upgrade is complete, click this to close the form and return to ReaderManager.

7 Status area shows upgrade states and transfer progress. Error message are also displayed in this area.

Table 21