User Guide

Reader Manager Guide Page 45 of 62 40-10-006-DOC 15/09/2006
6.9 Simple Tag Test
This tool is provided to test a number of tags.
To access this tool, select Tools->System->Simple Tag Test
The test writes a checker board pattern from address 10 to 31 to each tag sighted by the reader. All data
is read and verified. All tests must be read and written to and verified within 20 seconds for the test to
pass.
This tool is shown in Figure 33, the tool elements are described in Table 19
Figure 33
Index Description
1 Enter the total number of tags placed on all antennas.
2 Shows the number of tags sighed on all antennas.
3 Shows any fail messages at the end of the test
4
Test result indicator.
Green – Test pass
Yellow – Test in progress
Red – Test failed.
5 Click this to start or stop the test.
Table 19
1
2
3
4
5