User Guide

Reader Manager Guide Page 31 of 62 40-10-006-DOC 15/09/2006
Index Description / Command Index Description / Command
4
CommandCycleEnabled()
When ticked the reader will send tag
commands. This should always be
ticked.
11
SpecificPhaseMax()
Sets how many tag specific commands are sent per
interrogate / break phase.
5
AxisBreak()
1
When ticked the reader will power off
periodically and switch axes. The
setting should always be ticked.
12
TuneAxisEvery()
2
Controls how frequently the reader runs the auto
tune sequence.
6
PreCommandDelay()
This is the fixed delay after an axis start
before the command is sent.
13
DiplexerPowerMode()
1
Sets the power field level.
7
PreCommandDelayRandom()
This behaves like the
PreCommandDelay function except
that the time before the first command
is variable and causes the tag to
randomly hop to a different channel.
14
Time()
Sets the reader system time.
Table 11
Notes:
1. For AVR readers only.
2. For readers which have a diplexer with an auto tune circuit.