User Guide

Reader Manager Guide Page 30 of 62 40-10-006-DOC 15/09/2006
6.7.2 System Settings
Figure 21
These settings should be left at their default values.
Index Description / Command Index Description / Command
1
IndependentAxis()
Tick this to make all axes in a group
behave as separate antennas. If not
ticked, antennas in the same group are
treated as one antenna – tags will not
expire when moved between them.
8
PostBreakDelay()
Sets the delay between a small power break in the
command sent to a tag.
2
AxisCycleEnabled()
When ticked the reader will power off
periodically and switch axes. This
setting should always be ticked.
9
IdleModulation()
On readers which support this command it changes
what bits are sent to the reader when no command is
sent.
3
BreakCycleEnabled()
When ticked the reader will send small
power breaks to stack tags. In Item Tag
mode this is disabled otherwise it
should always be ticked.
10
SpecificRetryMax()
Sets how many times to send a tag specific command
when no reply is received.
7
8
9
1
0
1
2
3
4
5
1
1
1
2
13
14
6