User Guide

Reader Manager Guide Page 29 of 62 40-10-006-DOC 15/09/2006
Index Description / Command Index Description / Command
17
WithTime()
If ticked the time and date will be
added to the tags reply.
36
Refresh the displayed settings
18
FastReplyDecode()
If ticked the reader will decode all tag
replies as soon as they are received. In
most cases this should be left un-ticked.
37
Clear the settings on the reader which are loaded
when the reader is powered. When the reader is next
powered up it will load the factory default settings.
19
TagReplyMode()
To add a reply mode:
1. Click the mode you would like
to add from the left list.
2. Click the right pointing arrow.
To remove a reply mode:
1. Click the mode you would like
to remove from the right list.
2. Click the left pointing arrow.
To change the order of the active reply
mode parameters:
1. Click the mode you would like
to re-order from the right list.
2. Click the up arrow to move
the mode to the top of the list.
3. Click the down arrow to move
the mode to the end of the list.
38
Save the current settings to the reader. These
settings will be loaded when the reader is powered
on.
Figure 20
Notes:
1. For AVR readers only.