User Guide

Reader Manager Guide Page 24 of 62 40-10-006-DOC 15/09/2006
6.6 Memory Map
This tool allows the entire memory of tags to be examined and changed. It also supports creation of tag
configurations that define a series of writes that can be applied to any tag.
To access this tool, select Tools->System->Memory Map
Whenever a tag is clicked once, the memory panes will be updated to reflect that tag.
This tool is shown in Figure 18, its elements are described in Table 10.
Figure 18
Index Description
1
List of all current tags and tag configurations. Whenever a new tag is placed on the reader, it will appear in
this list.
Each tag is identified by its specific ID. The colour of this ID changes according to context:
• Green for a new tag. It will remain in this colour until all the tag's memory has been read.
• Blue for a tag that has been completely read. This is an active tag that is ready to be written to.
• Grey when a tag has expired. This indicates the tag has left the field or has been muted indefinitely.
• Red when writes to the tag are being attempted. Usually, a tag will remain in this state for a short time
while the writes are being performed.
2 Select this tab to view / change tag system memory.
3 Select this tab to view / change tag user memory.
2
1
3
4
6
5
7
8
1
1
9
12
1
3