Installation Guide

Installation time: before drilling, please confirm
whether there is power line or water pipe in the wall
with the help of electronic detection instrument. If
you use an electric drill, don't forget the following
two points:
一、
Installation environment
1
、
Please wear protective glasses
2
、
Turn off the power after using the equipment
二、
Installation dimension
Before installation, refer to the product installation
dimension drawing to determine the installation position.
Drilling positioning hole: first, determine the
location of the installation hole and mark it
according to the product installation dimension
drawing; Drill with a special drill bit, drill the
expansion glue fixing hole with a percussion drill,
and drive in the expansion glue.
三、
Installation method
（
Style 6
）
1
、
According to the corresponding product
installation dimension drawing, determine the
location of the installation hole and mark it; The
fixing seat is installed on the wall by special
method; Refer to the installation environment.
2
、
Drive the screw pellets into the hole and tighten
the screw with a screwdriver. Lock the fixing seat
on the wall.
3
、
Install the slide bar into the fixing seat on the
wall, and fix the slide bar with a hexagon
al screwdriver.
26.378"
-1--8-