Installation Guide

三、
Installation method
1
、
According to the corresponding product
installation dimension drawing, determine the
location of the installation hole and mark it; The
fixing seat is installed on the wall by special
method; Refer to the installation environment.
2
、
Drive the screw pellets into the hole and tighten
the screw with a screwdriver. Lock the fixing seat
on the wall.
（
Style 1
）
23.622"
3
、
Install the slide bar into the fixing seat on the
wall, and fix the slide bar with a hexagon
al screwdriver.
三、
Installation method
（
Style 4
）
35.433"
1
、
According to the corresponding product
installation dimension drawing, determine the
location of the installation hole and mark it; The
fixing seat is installed on the wall by special
method; Refer to the installation environment.
2
、
Drive the screw core into the hole, open the
plastic fixing seat cover, install the sliding rod into
the fixing seat, and then tighten the screw with a
screwdriver. Lock the mounting on the wall.
3
、
Install the cover of the fixing base on the fixing
base .
-3--6-