User guide

13
Care and Maintenance
Your mini-S3 BTGPS receiver is a highly sophisticated piece of electrical equipment
which requires special care and maintenance. Please follow the suggestions below
to fulfill any warranty obligations and ensure you get the best performance possible
from your mini-S3.
DO
Keep the mini-S3 BTGPS receiver dry.
Exposure to rain and/or environments with high humidity will cause the receiver
to malfunction and create irreversible damage. Precipitation, humidity, and
other liquids contain minerals that can corrode the electronic circuit boards as
well as the connector, jack, and plug. Protective cases are available for the
mini-S3. Please contact your retailer for more information.
Use/store the mini-S3 at a temperature between 15°C (59°F) & 25°C
(77°F).
Exposure to extreme hot or cold conditions, such as a closed car in summer or
winter, will affect the performance of the receiver and reduce both the capacity
and lifetime of the battery.
When not in use, store the receiver in a clean environment.
If left in an unclean environment, dirt and dust can enter the circuit board and
damage the receiver.
Clean with a soft, dry cloth.
Use of harsh cleaning solvents, chemicals or strong detergents will damage the
receiver.
Use only EMTAC branded chargers to charge the mini-S3 receiver.
Use of any charger other than the one provided may damage the S3 and create
the risk of explosion.
Use only accessories approved for use with the mini-S3.
Unauthorized accessories, antenna, modifications or attachments can damage
the S3, may void warranty, and violate regulations governing radio devices.
Keep the mini-S3, battery, battery cover and all accessories out of small
children’s reach.