User guide

10
2. Connect the mini-S3 with the host device.
Typical examples are given in the .pdf files named “BTpair_” (and/or similar
files), in this User Guide CD-ROM. Please follow the step-by-step operation
guide indicated and described in the files, respectively. If prompted, the
mini-S3 BTGPS passkey is 0183.
3. Operating the GPS/Mapping software.
To open and use the GPS/MAP application, in your host device:
1. Make sure your BTGPS is connected with the host via Bluetooth.
2. Open the GPS/MAP application on the host device.
3. Enter the correct COM port and baud rate (4800-38400) into the GPS
setup area of your GPS/MAP application.
You can use all the functions of GPS/MAP application software by following the
detailed User Guide of the GPS/MAP application software.
Example:
This screen-shot indicates the BTGPS is
connects with host.