Operation Manual

Manual Indicator SA 250
pag. 3
Display: keys and display symbols
PCG/C SA 250 Indicator Manual 23-03-07
Front panel
Keys:
Indications:
Switch on scale Led orange/yellow : battery is charging
Led yellow/green : charging completed
Switch off scale Weight is above the settled up-limit
Weight is in between the up- and down-limit
Switch on parts counting function Weight is below the settled down-limit
Indication of :
- maximum scale capacity
Set zero of the gross weight value, - legal minimum weighing range
range + en - 2 % of the scale capacity - value scale divisions (e)
Tare = set zero over the complete
Display symbols:
scale capacity
Reading is exact zero, within 0,2 scale division
Hi-Lo function, input weight limits Reading has achieved a complete standstill
(if the function is selected only)
NET If the  sign up here is on, the reading is the
Toggle from weighing Æ weighing with net weight value: a tare value has been subtracted
lock up Æ Hi-Lo Æ parts counting and back
Cursor operation “left” move Scale is in parts counting mode
Printing / data transmission The Hi-Lo function is in operation
Cursor operation “up” move
F1 of F2 The lock up function is in operation
Operating a key causes a short “beep” sound as a confirmation.
If a selected function cannot be executed a longer “beep” sounds as a warning.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel [phone]
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax [phone]
3892 DA ZEEWOLDE The Netherlands