Operation Manual

Manual Indicator SA 250
pag. 11
PCG/C SA 250 Indicator Manual 23-03-07
Two Baud rates are selectable: 9600 Bd and 2400 Bd
With key the available choices are shown.
With key the selected speed may be entered , followed by automatic
stepping to the next menu line.
De Hi-Lo function may be switched on or off :
0 = off 1 = on
With key the available choices are shown.
With key the selected choice may be entered , followed by automatic
stepping to the next menu line.
Short or longer “beeps” may sound if the weight is “above upper limit”.
At display reading 0,0 kg the beeps will be switched off.
0 = no beeps
1 = short beeps (be.be.be.be…)
2 = long beeps (beee..beee..beee…)
With key the available choices are shown.
With key the selected choice may be entered , followed by automatic
stepping to the next menu line.
Short or longer “beeps” may sound if the weight is “below low limit”.
At display reading 0,0 kg the beeps will be switched off.
0 = no beeps
1 = short beeps (be.be.be.be…)
2 = long beeps (beee..beee..beee…)
With key the available choices are shown.
With key the selected choice may be entered , followed by automatic
stepping to the next menu line.
Short or longer “beeps” may sound if the weight is “correct” .
At display reading 0,0 kg the beeps will be switched off.
0 = no beeps
1 = short beeps (be.be.be.be…)
2 = long beeps (beee..beee..beee…)
With key the available choices are shown.
With key the selected choice may be entered , followed by automatic
stepping to the next menu line.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel [phone]
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax [phone]
3892 DA ZEEWOLDE The Netherlands
Baud rate
Hi-Lo setting On / off
Hi-Lo setting “Beeps” at: Hi
Hi-Lo setting “Beeps” at: Lo
Hi-Lo setting “Beeps” at: OK