Operation Manual

Manual Indicator SA 250
pag. 8
PCG/C SA 250 Indicator Manual 23-03-07
The User Mode is selected by pressing key continuously and then
starting the scale with key .
As soon as the display shows: CAL , release the key.
Press key to step to the first and the next menu lines.
After operating key in one of the menu lines, the present values of that
line will be entered, followed by automatic stepping to the next line.
After this, at each line position in the menu, the User Mode may be shut down
by pressing key , memorizing all the data that has been entered via key
With key the available settings of each line may be selected.
The User mode is always accessible for the user and may be edited.
The automatic zero setting may be switched off, or selected to be in operation
around + or - ½ scale division from the gross zero weight value.
With key the available choices are shown.
½ division With key the selected function may be entered , followed by automatic
stepping to the next menu line.
The Auto off function switches off the scale automatically after . . minutes
standstill (not in programming modes). This saves the battery’s capacity.
0 = auto off switched
1 = 5 minutes
2 = 10 minutes
3 = 20 minutes
4 = 30 minutes
With key the available time delays are shown.
With key the selected value may be entered , followed by automatic
stepping to the next menu line.
WEEGTECHNIEK HOLLAND B.V. Website www.weegtechniek.nl Tel [phone]
Patroonsweg 23-27 Email info@ weegtechniek.nl Fax [phone]
3892 DA ZEEWOLDE The Netherlands
USER mode, how to operate
Automatic Zero (Auto 0, keeps the reading with an empty platform on zero)
MENU USER mode
Automatic switch off
The hatched frames
show the default
settings.