Integration Guide

SATEL-TR4+
Integration Guide, Version 1.7
40
Operation
mode
SL+S=x
Activate sleep mode
"1" turn the modem into a state
where it will hold serial interface
parts of the module on, wakeup will
take approx. 30ms
"5" Turns ON Power save mode.
"6" Turns OFF Power save mode.
“OK” or “ERROR”
Operation
mode
SL%Z=0
SL commands are OFF (working
then only in the command mode)
and CR/LF feature OFF
“OK” or “ERROR”
Operation
mode
SL%Z=1
SL commands are always ON and
CR/LF feature OFF
“OK” or “ERROR”
Operation
mode
SL%Z=3
SL commands are always ON and
CR/LF feature ON
“OK” or “ERROR”
Operation
mode
SL%Z=4
SL commands are OFF (working
then only in the command mode
and CR/LF feature ON
“OK” or “ERROR”
Operation
mode
SL%Z?
Get SL command mode
Responds with a number
accordingly