Integration Guide

SATEL-TR4+
Integration Guide, Version 1.7
38
a=CallSignState (0=OFF,
1=ON)
b=CallSignInterval (0…255)
in minutes
c=CallSignId (max 16
alphanumeric characters)
For example:
“1,5,MYMESSAGE” followed
by Carriage Return
character
RadioProperty
SL@C=a,b,c
Set Call Sign settings
a=CallSignState (0=OFF, 1=ON)
b=CallSignInterval (0…255) in
minutes
c=CallSignId (max 16 alphanumeric
characters)
“OK” or “ERROR”
RadioProperty
SL@D?
Get Tx delay (ms)
For example "0 ms" or "50
ms"
RadioProperty
SL@D=n
Set Tx delay (ms), n is [0…65535]
"OK" or "ERROR"
RadioProperty
SL@E?
Get supported radio compatibility
modes.
List of numbers, separated
by commas, showing the
supported modes:
0=Satel3AS, 1=PacCrest
4FSK, 20=SATEL-8FSK-1,
21=SATEL-8FSK-2,
22=SATEL-16FSK-1
For example: "0,1"
indicates that the modem
supports Satel3AS and
PacCrest 4FSK protocols.
RadioProperty
SL@F?
Get noise level of radio channel
"-xxx dBm"
RadioProperty
SL@M?
Get repeater function
"O" = Repeater
OFF(character O)
"R" = Repeater ON
RadioProperty
SL@M=x
Set repeater function. Values of x
are:
"O" = Repeater function
OFF(character O)
"R" = Repeater function ON
"OK" or "ERROR"
RadioProperty
SL@P?
Get transmitter output power
One of these values
"10mW", "20mW", "50mW",
"100mW", "200mW",
"500mW", "1000 mW".
RadioProperty
SL@P=nnnnn
Set RF output power (mW)
For example "SL@P=100" sets 100
mW transmitter output power.
Range: 10, 20, 50, 100, 200, 500,
1000
"OK" / "ERROR"