Integration Guide

SATEL-TR4+
Integration Guide, Version 1.7
2
RESTRICTIONS ON USE – SATEL-TR4+
SATEL-TR4+ radio transceiver module has been designed to operate on 403-473 MHz, the exact
use of which differs from one region and/or country to another. The user of a radio transceiver
module must take care that the said device is not operated without the permission of the local
authorities on frequencies other than those specifically reserved and intended for use without a
specific permit.
SATEL-TR4+ is allowed to be used in the following countries. More detailed information is
available at the local frequency management authority.
Countries: AE, AT, AU, BE, BG, BR, CA, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, HR, IE, IS, IT,
JP, KR, LT, LU, LV, MT, NL, NO, PL, PT, RU, RO, SE, SI, SK, TR, US
WARNING – RF Exposure! To comply with RF exposure compliance requirements in Europe, USA
and Canada maximum antenna gain is 14dBi and a separation distance listed in a table below must
be maintained between the antenna of this device and all persons. This device must not be co-located or
operating in conjunction with any other antenna or transmitter.
Antenna Gain [dBi]
Separation distance [cm]
0
23
4
36
6
45
8
56
10
71
12
89
14
112
Host product labeling requirements
SATEL-TR4+ is intended to be integrated into a host device. Therefore, the SATEL-TR4+ product
related FCC ID and IC ID must be visible in the host device chassis:
FCC ID: MRBSATEL-TA40
IC: 2422A-SATELTA40
WARNING! Users of SATEL-TR4+ radio transceiver module in North America should be aware, that due to
the allocation of the frequency band 406.0 – 406.1 MHz for government use only, the use of radio
transceiver module on this frequency band without a proper permit is strictly forbidden.