Integration Guide

SATELLINE-M3-TR3
and –TR4
Integration Guide, Version 1.6
31
RadioProperty
SL@R?
Get RSSI (Received Signal Strength
Indication) of last received
message (dBm)
”-nnn dBm”, nnn is a
decimal value of field
strength between –80 dBm
and –118 dBm.
Value is available 7 s after
reception, after that the
response is "<-118 dBm".
SATELLINE-3AS Epic
returns the stronger value
of two transceivers.
Radio Property
SL@S?
Get radio compatibility mode
"0" = SATELLINE-3AS
"1" = PacCrest-4FSK
(Option1)
"2" = PacCrest-GMSK
(Option2)
“3” = Trimtalk450s(P)
(Option 3, RX fits PacCrest
modems)
“4” = Trimtalk450s(T)
(Option 4, RX fits Trimble
modems)
"5" = PacCrest-FST
(Option 5)
RadioProperty
SL@S=x
Set radio compatibility mode.
Value of x is:
0 = SATELLINE-3AS
1 = PacCrest-4FSK (Option1)
2 = PacCrest-GMSK (Option2)
3 = Trimtalk450s(P) (Option 3, RX
fits PacCrest modems)
4 = Trimtalk450s(T) (Option 4, RX
fits Trimble modems)
5 = PacCrest-FST (Option5)
20 = 8FSK FEC OFF (TR4 only)
21 = 8FSK FEC ON (TR4 only)
22 = 16FSK FEC ON (TR4 only)
"OK" or "ERROR"
Reset
SL@X=n
Reset command. Values of n are:
"9" Reset modem
"OK" or "ERROR", then
modem resets required
blocks.
Test
SL+P=xxxx
Get measured signal strength from
remote modem i.e. SL “ping”
Value of xxxx [0000...ffff] defines
address of remote modem
"OK" followed by RSSI info
from remote modem