Integration Guide

SATELLINE-M3-TR3
and TR4
Integration Guide, Version 1.6
2
RESTRICTIONS ON USE
SATELLINE-M3-TR3 and TR4 radio transceiver modules have been designed to operate on 403-
473 MHz, the exact use of which differs from one region and/or country to another. The user of
a radio transceiver module must take care that the said device is not operated without the
permission of the local authorities on frequencies other than those specifically reserved and
intended for use without a specific permit.
SATELLINE-M3-TR3 and TR4 are allowed to be used in the following countries, either on license
free channels or on channels where the operation requires a license. More detailed information
is available at the local frequency management authority.
Countries: AT, BE, BG, CA, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LT, LU,
LV, MT, NL, NO, PL, PT, RU, RO, SE, SI, SK, US
WARNING! Users of SATELLINE-M3-TR3 and TR4 radio transceiver modules in North America should be
aware, that due to the allocation of the frequency band 406.0 406.1 MHz for government use only, the
use of radio transceiver module on this frequency band without a proper permit is strictly forbidden.
Host product labeling requirements
SATELLINE-M3-TR3 and TR4 is intended to be integrated into a host device. Therefore the
SATELLINE-M3-TR3 and TR4 product related FCC ID and IC ID must be visible in the host
device chassis:
FCC ID: MRBSATEL-TA23
IC ID: 2422A-SATELTA23
This integration guide applies to the combination of Firmware version/Hardware version listed in
the table below. See www.satel.com for the newest firmware and Integration Guide version.
Firmware version
Hardware version
Note!
07.22.2.0.2.4
SPL0020d,6
Since 12.08.2013
07.22.2.0.3.2
SPL0020d,7
01.10.2013
WARNING - RF Exposure
To comply with FCC and IC RF exposure compliance requirements, maximum antenna gain is
14 dBi and separation distance of at least 1 meter must be maintained between the antenna
of this device and all persons. This device must not be co-located or operating in conjunction
with any other antenna or transmitter.