User Guide

SATELLINE-EASy Pro 35W
User Guide v.0.2
55
The cursor > will now blink under the first digit of
the value indicating the (this first digit cannot be
edited). To move onto the next digit, press ”Next”.
Press ▲▼until the said digit has reached the desired
value. Press ”NEXT” to move on to the next digit and
repeat the above-described steps.
New common freq
468.52500 MHz
^
Cancel▲▼ Next
Previous steps are repeated four (4) times.
Press ▲▼, until the last changeable digit has the
desired value and confirm changes by pressing
”Set”. The following information will be displayed for
a few seconds.
Ch accepted
468.52500 MHz
The radio modem will acknowledge changes if they
are between band limits. The display will return
automatically to display the main menu (if the
entered frequency is not acceptable an error
message will be displayed).
CF 468.5000 MHz
>468.2000 MHz
^
CANCEL ▲▼ SET
Ch accepted
>468.2000 MHz
CHECKING/CHANGING THE REFERENCE FREQUENCY
Press SETUP, set cursor at the Radio frequency and
press Select.
>Radio frequency
Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
Contrast
EXIT ▲▼Select
Press ▲▼ until the cursor points at “Reference freq”
selection and press ”Change”.
TX & RX freq
TX freq
RX freq
> Reference freq
Ch Spacing
Back ▲▼ Change