Specifications

SATEL INT-KSG 7
Date/Time format – selection of the format of time and date display on the keypad.
LCD backlight – selection of the display backlight type.
Keys backlight – selection of the keypad backlight type.
Alarm messages – you can define whether the keypad is to display text messages about
alarms:
 in partitions [Part.al.msg.];
 from zones [Zone al.msg.].
Alarms – you can define which alarms will be triggered from the keypad:
 fire – touch and hold the key for approx. 3 seconds.
 panic – touch and hold the key for approx. 3 seconds.
 auxiliary [medical] – touch and hold the key for approx. 3 seconds.
 3 wrong codes – enter an invalid code three times.
Additional options – a set of additional options to start some functions of the keypad:
Silent PANIC alarm [Silent panic] – with this option enabled, touching the
key for
approx. 3 seconds will trigger the silent panic alarm.
Signaling entry delay [Entry time s.] – with this option enabled, the keypad will audibly
signal the entry delay countdown.
Signaling exit delay [Exit time sig.] – with this option enabled, the keypad will audibly
signal the exit delay countdown.
Signaling alarms [Alarm signal.] – with this option enabled, the keypad will signal the
alarms audibly.
Key sounds – with this option enabled, pressing the keypad keys is confirmed by beeps.
Signaling troubles in partially arm [Trbl. in p.arm.] – with this option enabled, the keypad
signals troubles by means of the
LED, if some of the operated partitions are armed
(the troubles are not signaled if all partitions are armed).
Signal new trouble [New trbl. sign.] – with this option enabled, the keypad can audibly
signal the occurrence of a new trouble (if the T ROUBLE MEMORY UNTIL REVIEW system
option is enabled).
Show code entering [Show code ent.] – with this option enabled, entering the code is
presented on the keypad display by asterisks.
Show keypad name [Name (2nd row)] – with this option enabled, the keypad name is
presented in the lower line of the display.
Exit delay clearing enable [Fin. exit time] – with this option enabled, the exit delay time in
partitions with the E XIT DELAY CLEARING option enabled can be shortened after pressing
in turn the 9 keys.
Show violated zones [Zone violation] – with this option enabled, violating the CHIME
signal triggering zone result additionally in the zone name being displayed.
Auto-Arm delay countdown signaling [Auto-arm delay] – with this option enabled, the
auto-arm delay countdown in partition is signaled acoustically.
Display mode switching [Dspl. mode chg.] – with the option enabled, you can toggle the
display between the standby mode and the partition status display mode by using the 9
key.
Show disarm messages [Show disarming] – if this option is enabled, the keypad will
inform about disarming with a displayed message at all times. If the option is disabled –
only in case of disarming from the given keypad.
Show arm messages [Show arm] – if this option is enabled, the keypad will inform about
disarming with a displayed message (irrespective of how the system was armed).